Zanussi ZDLN7531 Notice D'utilisation page 19

Clogged holes can cause unsatisfactory washing
results.
1. Pull out the upper basket.
2. To detach the spray arm from the basket, press
the spray arm upwards and simultaneously turn
it clockwise.
3. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes.
4. To install the spray arm back, press the spray
arm upwards and simultaneously turn it
counterclockwise until it locks into place.
CLEANING THE CEILING SPRAY ARM
We recommend to clean the ceiling spray arm
regularly to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
The ceiling spray arm is placed on the ceiling of the
appliance. The spray arm (C) is installed in the
delivery tube (A) with the mounting element (B).
1. Move the upper basket to the lowest level to
reach the spray arm more easily.
2. To detach the spray arm (C) from the delivery
tube (A), turn the mounting element (B)
counterclockwise and pull the spray arm
downwards.
3. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes. Run the water
through the holes to wash soil particles away
from the inside.
4. To install the spray arm (C) back, insert the
mounting element (B) in the spray arm and fix it
in the delivery tube (A) by turning it clockwise.
Make sure that the mounting element locks into
place.
C
B
A
19