Zanussi ZDLN7531 Notice D'utilisation page 10

Number Settings
6 Latest pro-
gramme selec-
tion
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting mode.
Instructions on how to configure the appliance are
provided further in this chapter.
When the appliance is in setting mode, the display
shows a digit and a letter. For each setting, a
dedicated letter is displayed. The dedicated letters
are indicated in the table.
The order of the basic settings presented in the
table is also the order of the settings in setting
mode.
THE WATER SOFTENER
The water softener removes minerals from the water
supply, which would have a negative effect on the
washing results and on the appliance.
Water hardness
German degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent used, set
the proper water hardness level to keep the
salt refill indicator active.
10
Values
1H (on)
0H (off)
French degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
Enable or disable the automatic selection of the
most recently used programme and options.
Factory setting: 0H.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
water authority can advise you on the hardness of
the water in your area. It is important to set the right
level of the water softener to assure good washing
results.
Clarke de-
mmol/l
grees
8.4 - 9.0 58 - 63
7.6 - 8.3 53 - 57
6.5 - 7.5 46 - 52
5.1 - 6.4 36 - 45
4.0 - 5.0 28 - 35
3.3 - 3.9 23 - 27
2.6 - 3.2 18 - 22
1.9 - 2.5 13 - 17
0.7 - 1.8 5 - 12
<0.7
1)
Description
Water softener level
5
< 5
1
10
9
8
7
6
1)
4
3
2
2)