Steinberg Systems SBS-KW-300AW Mode D'emploi page 12

If scale is tared, or held, unit switching is not allowed
ZERO
Press for 1 second to zero scale
"ZERO" shows and weight turns zero.
EN
If weight is tared, or not stable, or held, zero is not allowed.
If weight is over Manual-Zero range, zero is not allowed.
SETTING applicable to scale models SBS-KW-300AW, SBS-KW-300AB and SBS-
KW-300AR
Press and simultaneously, and hold two buttons for 1 second, to enter
Setting Mode
Press to enter Auto-Off option; and press
Auto-Off can be set to 0 (disabled), 5 (5min), 15 (15min), 30 (30min), 60 (60min).
to change Auto-Off option.
22
Press to enter Auto-Zero option; and press
Auto-Zero can be set to 0 (disabled), 2 (2%F.S.), 4 (4%F.S.), 10 (10%F.S.), 20 (20%F.S.),
50 (50%F.S.).
Press to enter Manual-Zero option; and press
option
Manual-Zero can also be set to 0 (disabled), 2 (2%F.S.), 4 (4%F.S.), 10 (10%F.S.), 20
(20%F.S.), 50 (50%F.S.).
Press to enter Backlight option; and press
Backlight can be set to off (disabled), 5 (5sec), 15 (15sec), 30 (30sec), 60 (60sec), on
(never).
When Backlight is set to 5, 15, 30, or 60, scale turns off backlight in corresponding
seconds after it is stable.
When Backlight is set to off, backlight is disabled, and never turns on
When Backlight is set to on, scale never turns off backlight, no matter it is stable or
not
Press to exit the Settings Mode.
to change Auto-Zero option.
to change Manual-Zero
to change Backlight option.
23
EN