SOMFY Sonesse ULTRA 30 WF Zigbee Li-ion Notice page 5

Les langues disponibles

Sonesse ULTRA 30 WF Zigbee Li-ion

2.3.2.Start-up

To set the drive, you need to access and use Set&Go Connect application, you must have a compatible phone or mobile

device and access to the internet.

The App is downloadable for free from Apple Store platforms and Google Play Store on the following mobile devices:

▪ Apple iPhone

mobile phone or mobile device with iOS operating system running iOS 11 and later.

▪ Mobile phone or mobile device with operating system Android

The software version of the Set&Go Connect application may be updated from time to time to add new features and

services.

2.3.3.Drive settings

▪ Once the Set&Go Connect application is downloaded, open the app and

follow the instructions to set the drive.

▪ Once the drive is set, check the settings by pressing the button on the motor

head:

◦ To start the motorised product movement, briefly press the button on the

motor head.

◦ To stop the motorised product movement, briefly press the button on the

motor head.

◦ To move the motorised product in the opposite direction of the previous

movement, briefly press the button on the motor head again.

◦ To stop the motorised product movement, briefly press the button on the

motor head, and so on.

2.3.4.Network management

NOTICE

Network status when the motor wakes up: The motorised product briefly moves up and down. If the orange LED blinks, it

is not linked to any network. If the LED doesn't light up and the motorised product briefly moves up and down, then it is linked

to a network.

To join a network:

▪ Follow the instructions on the Set&Go Connect application,

▪ Press and hold the motor head programming button until the product moves

up and down twice.

™

OS 6.0 and later.