AEG BPE748380B Notice D'utilisation page 73

Remote Operation indicator - the appliance can be controlled remotely.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Step 1
Remove all accessories and remov‐
able shelf supports from the appli‐
ance.
5.2 First connection
The display shows welcome message after the first connection.
You have to set: Language, Display Brightness, Key Tones, Buzzer Volume, Time of Day.
5.3 Wireless connection
To connect the appliance you need:
• Wireless network with the Internet connection.
• Mobile device connected to the same wireless network.
Step 1 To download My AEG Kitchen app: Scan the QR code on the rating plate with the camera on your
mobile device to be redirected to AEG Homepage. The rating plate is on the front frame of the ap‐
pliance cavity. You can also download the app directly from the app store.
Step 2 Follow the app onboarding instructions.
Step 3 Turn on the appliance.
Step 4
Press:
Step 5
- slide or press to turn on: Wi-Fi.
Step 6 The appliance wireless module starts within 90 sec.
Frequency
Remote Operation is turned on.
Clean the appliance and the acces‐
sories only with a microfibre cloth,
warm water and a mild detergent.
. Select: Settings / Connections.
2.4 GHz WLAN
2400 - 2483.5 MHz
Step 2
movable shelf supports in the appli‐
Step 3
Place the accessories and the re‐
ance.
ENGLISH 73