IMG STAGELINE PARL-1DMX Mode D'emploi page 12

All operating elements and connections described
GB
can be found on the fold-out page 3.
Contents
1 Operating Elements and Connections . . . . 12
1.1 Spotlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.2 Remote control LC-3 . . . . . . . . . . . . . . . . . . . 12
2 Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . 13
4 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5 Setting into Operation . . . . . . . . . . . . . . . . . 14
5.1 Basic adjustments . . . . . . . . . . . . . . . . . . . . . 14
6 Operation without DMX controller . . . . . . . 14
6.1 Selecting a function . . . . . . . . . . . . . . . . . . . . 14
6.1.1 Show programmes . . . . . . . . . . . . . . . . . . . 14
6.1.2 Colour radiator . . . . . . . . . . . . . . . . . . . . . . 15
6.2 Interconnecting several PARL-1DMX units . . 15
6.3 Remote control with the LC-3 . . . . . . . . . . . . 16
7 Operation via a Light Controller . . . . . . . . . 16
7.1 DMX connection . . . . . . . . . . . . . . . . . . . . . . . 16
7.2 Adjusting the DMX mode . . . . . . . . . . . . . . . . 16
7.3 Adjusting the start address . . . . . . . . . . . . . . 17
7.4 Control with the LED-4C . . . . . . . . . . . . . . . . 17
8 Further Functions . . . . . . . . . . . . . . . . . . . . 17
8.1 Display of the operating hours . . . . . . . . . . . . 17
8.2 Display of the firmware version . . . . . . . . . . . 17
9 Cleaning the Unit . . . . . . . . . . . . . . . . . . . . . 17
10 Specifications . . . . . . . . . . . . . . . . . . . . . . . . 18
10.1 DMX channels . . . . . . . . . . . . . . . . . . . . . . . . 18
10.2 Menu structure . . . . . . . . . . . . . . . . . . . . . . . . 19
12
1 Operating Elements and Connections
1.1 Spotlight
1 Mounting bracket
2 Locking screws for the mounting bracket
3 Display
4 Indicating LEDs
LED DMX lights up when DMX control signals are
present at the DMX INPUT (10)
LED MASTER lights up in the master mode
(operation without DMX controller or with the
remote control LC-3)
5 Operating buttons
Button MENU to call the adjusting menu and to
select the menu items
Buttons DOWN and UP to change an adjustment in
the menu
Button ENTER to activate a menu item and to
memorize an adjustment
6 Indicating LEDs
LED SLAVE lights up in the slave mode
(control by another PARL-1DMX or by the control
panel LED-4C)
LED SOUND lights up shortly in case of music con-
trol via the microphone (7)
7 Microphone for music control
8 Connecting jack for the remote control LC-3
9 DMX signal output (3-pole XLR) for connection to
the DMX input of another DMX light effect unit;
pin 1 = ground, 2 = DMX-, 3 = DMX+
10 DMX signal input (3-pole XLR) for connection of a
light controller;
pin 1 = ground, 2 = DMX-, 3 = DMX+
11 Mains jack for connection to a socket (230 V~ /
50 Hz) via the supplied mains cable
12 Support for the mains fuse
Only replace a blown fuse by one of the same type.
1.2 Remote control LC-3
The remote control is available as an accessory and
not supplied with the PARL-1DMX.
13 Button STAND BY to switch the LEDs off and on
14 Button FUNCTION to select different functions de-
pending on the operating mode selected with but-
ton MODE (15) [
15 Button MODE to select between
– Stroboscope (
The LED of button MODE does not light up.
– Function of colour radiator: 16 preset colours and
a colour which has manually been adjusted can
chapter 6.3]
chapter 6.3)