EUROM CK501R Mode D'emploi page 18

Mounting the pedestals
1. Screw and tighten the pedestals
included self-tapping screws
Figure 9.
Installation
WARNING
• Do not insert the power plug into the wall socket before the device is correctly
mounted.
• Do not use an extension cable; this can cause overheating and fire. If using an
extension cable is unavoidable, make sure it is undamaged and earthed. Use
an extension cable with a minimum power of 500 Watt. Always unwind the
extension cable completely to prevent overheating.
CAUTION
Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances.
1. Make sure the device is correctly mounted.
2. Make sure you have the following minimum free space:
◦ Front: 50 cm.
◦ Back: 30-50 cm.
◦ Sides: 50 cm.
◦ Top: 100 cm.
18
(Figure 9, pos. 2) to the bottom of the heater using the
(Figure 9, pos. 1).