Using Coffee Beans; Using Ground Coffee - Melitta AROMAFRESH Mode D'emploi

• Close the water tank lid and place the glass jug with
closed lid in the appliance.
• Set the number of cups  to the amount of water
in the water tank . The number of cups is shown
in the display .
Note: Ensure that the selected number of cups
corresponds to the amount of water in the water
container . Please note that when making coffee
all the water in the water tank is used. If the
number of cups and the amount of water do not
correspond to each other then this can lead to you
not getting the coffee flavour you would like.

5.1 Using coffee beans

• When the bean container is completely full, you can
brew enough coffee for 10 cups 2 or 3 times. Roast-
ed coffee beans lose their flavour. Only fill coffee
beans in the container which will be used within a
few days.
• Open the bean container lid and fill with coffee
beans . Then close the lid.
Note: To ensure the grinder functions perfectly
do not use caramelised coffee beans. Do not put
ground coffee in the bean container.
• Open the swivel filter  to the left.
1x4
• Fold a Melitta coffee filter at the embossed
® ®
seams and place it in the filter holder . Use your
hand to press the filter in to ensure the best fit.
• Swivel the filter back into the appliance. An audible
click indicates that the filter is in place.
• Turn the grind dial , to select the required grind
level (from fine to coarse). The grind dial allows you
to select from 3 different settings. Settings between
the symbols are also possible. The 'fine' setting is
for standard coffee. This setting may give the coffee
a slightly bitter character. If a coarser setting is
selected the coffee will be less bitter.
• Press the button to select coffee strength . The
selected coffee strength is shown in the display .
One coffee bean is for mild, two beans
medium and three beans
• Turn the appliance on using the start button ON/
OFF . Coffee preparation begins and the green
LED flashes.
Note: The appliance has an overload safety function
of the grinder, which protects the grinder against
damage by foreign objects in the coffee beans. If you
hear a loud chattering, unknown noise during the
grinding process, switch the appliacne off  and
clean the grinder as described in point 7.
• When the coffee is ready the green LED  is illu-
minated but stops flashing. The hot plate keeps your
coffee warm and switches off automatically after
the time you have set (see point 4). This avoids the
unnecessary use of electricity and saves energy. You
can of course turn the appliance off manually at any
time .
• The drip stop  prevents coffee dripping when you
remove the jug from the appliance.
• The used coffee filter can be disposed of simply and
easily using the removable filter insert.

5.2 Using ground coffee

• To use ground coffee select the ground coffee
setting .
• Open the swivel filter to the left .
• Fold a Melitta
seams and place it in the filter holder . Use your
hand to press the filter in to ensure the best fit.
• Put the ground coffee in the coffee filter. The amount
of coffee you use depends on your personal taste. We
recommend using 6g to 8g of ground coffee per cup.
• Swivel the filter back into the appliance. An audible
click indicates that the filter is in place.
• Turn the appliance on using the start button ON/
OFF . Coffee preparation begins and the green
LED flashes.
• When the coffee is ready the green LED  is illu-
minated but stops flashing. The hot plate keeps your
coffee warm and switches off automatically after
the time you have set (see point 4). This avoids the
unnecessary use of electricity and saves energy. You
can of course turn the appliance off manually at any
time .
• The drip stop  prevents coffee dripping when you
remove the jug from the appliance.
• The used coffee filter can be disposed of simply and
easily using the removable filter insert.
6. Timer Feature
The appliance is equipped with a TIMER. This allows
you to start brewing coffee automatically at the time
you set.
• Prepare the appliance as described in point 5. 'coffee
preparation' but without pressing the start button
ON/OFF .
• To set the required start time, hold down the
TIMER button . The first time you set it, the
time indicator and the clock symbol will flash in the
display . Set the required start time by repeatedly
for
pressing the H and M buttons . It is possible to
for strong.
speed this up by holding in the respective button.
• Two seconds after you let go of the TIMER button
the current time will be displayed again. The start
time you selected is saved until a new time is se-
lected or the appliance is removed from the power
supply.
• Pressing the TIMER button  briefly activates the
timer feature for automatic coffee preparation. The
start time you set appears briefly in the display .
The clock symbol in the display  and the white
LED are illuminated .
• The appliance starts preparing coffee automatically
at the time you set.
• If you do not remove the appliance from the mains
electricity or programme a new start time then the
time previously set is saved.
• The TIMER feature can be deactivated at any
time by pressing the TIMER button . The white
LED  and the clock symbol  are no longer
illuminated.
1x4
® ® coffee filter at the embossed
GB
10