Medion LIFE P85025 Manuel D'instructions page 152

Connection via LAN:
 If you have connected a network cable to access the Internet, then select the en-
try WIRED .
The Internet radio will then search for an Internet connection via Ethernet and will
establish the connection automatically. A successful or failed connection will be in-
dicated by a corresponding message.
Connection via WLAN:
 Select the WLAN access point via which the Internet radio is to be connected
and press the dial to confirm.
If this is an unencrypted (open) WLAN access point, the Internet radio will establish
the connection automatically.
 To connect via an encrypted network, please note the following sections.
10.6. WLAN connection via WPS
If a WLAN network has been selected that allows a connection via WPS, the WPS
menu appears. If you do not want to establish a connection via WPS, then select the
entry "SKIP WPS" here.
WPS button
 Select the PUSH BUTTON option, in order to use the WPS function by
means of the WPS button on the router.
 Then press the WPS button on the router and confirm the connection on the In-
ternet radio by pressing the dial (OK).
NOTE!
Please also refer to the instructions for the router.
The device will now establish a connection with the network. A successful connec-
tion will be indicated by a corresponding message.
The device can now play back media over the network and also receive Internet ra-
dio stations – as long as there is an Internet connection via the network.
The device saves the connection data so that it does not need to be entered again
for the next connection.
Entering the PIN
If the router does not have a WPS button but provides the possibility of WPS con-
nection via PIN entry in the router's web interface, select the option PIN.
When prompted in the router's web interface, enter the PIN number specified on
the display of the Internet radio and confirm the entry by pressing the dial (OK).
NOTE!
Please also refer to your instructions for the router, if required.
DE
FR
NL
EN
153 of 180