Dreame DreameBot L20 Ultra Complete Manuel D'utilisation page 17

How to Use
Vacuum and Mop
Note: When using the mop assembly for the first time, the robot
performs the "Vacuum and Mop" task by default.
1. Start cleaning
Press the button on the base station or on the robot, or use the
app to make the robot start from the base station. Then the robot will
plan the optimal cleaning route and perform the cleaning task based on
the created map.
Note:
·
To ensure the robot can easily return to the base station after cleaning, it
is recommended to make the robot start from the base station.
·
The mop pads will be cleaned before the robot starts mopping, please
wait patiently.
·
Do not move the base station, the clean water tank, the used water tank ,
or the washboard during operation.
2. Auto mop washing
When cleaning, the robot will automatically return to the base station to
wash mop pads based on the mop pad cleaning frequency specified in
the app. The base station will automatically refill the robot's water tank
and the robot will resume cleanup.
Self-Clean
EN
15