Installing Horizontal Tail And Pushrods On Control Horns - Horizon Hobby ParkZone F4F Wildcat BNF Manuel D'utilisation

EN
Installing Horizontal Tail and Pushrods
on Control Horns
Installing the Horizontal Tail
1. Install horizontal tail tube through hole in fuselage.
2. Install right horizontal tail on tube on right side of fuselage.
3. Attach right horizontal tail to fuselage.
8
4. Install the left horizontal tail (control horn is attached to
bottom of left panel) using the steps above, while connecting
the elevator joiner of the left and right horizontal tails.
5. Apply four (4) pieces of tape to horizontal tail sections and
top and bottom of fuselage.
Note: Removing tape will remove paint from painted parts.