Installing The Propeller - Horizon Hobby ParkZone F4F Wildcat BNF Manuel D'utilisation

EN

Installing the Propeller

Note: The information on this page is for maintenance of the F4F
Wildcat. Propeller damage can result from aircraft crashes.
CAUTION: DO NOT handle propeller parts while the flight
battery is connected to the ESC. Personal injury could result.
1. Put collet on the motor shaft.
2. Put the propeller backplate on the collet shaft.
12
3. Put the propeller on the collet shaft.
Notice: The propeller side with the numbers for diameter and
pitch (for example 9 x 6) should face out from the propeller
adapter.
Note: Propeller Adapter
Unit (PKZ1918) includes
4. Put the spinner nut on the collet shaft.
backplate, collet, and
spinner nut.
5. Tighten the spinner nut on the motor.
Note: A small amount of force may be needed to tighten
securely.