Mitsubishi Electric TRANE NTXAMT12A112AA Manuel D'installation page 43

Model Available ESP [in. WG]
12A112AA
18A112AA
24A112AA 0.30 0.50 0.80
30A112AA
36A112AA
The air handler will be set to 0.50 ESP from the factory.
The air handler's static pressure can be changed through the mode/function settings in the controller. Please refer to the
installation manual for the controller on how to change this option. Depending on the controller used, the mode/function will
be either 08 for mode (PAR-31 & Simple MA) or 108 for function (MHK1).
Vertical, Horizontal Left, Horizontal Right External Static Pressure Setting
External Static Pressure Setting No. of Mode/Function 08/108
0.3 in. WG [75Pa]
0.5 in. WG [125Pa]
(Factory Setting)
0.8 in. WG [200Pa]
Specifications are subject to change without notice.
NTXAMT12, 18, 24, 30, 36A112AA
Setting No. of Mode/Function 10/110 (Factory Setting)
1
2
3
1
1
1
43 © 2018 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.