Mitsubishi Electric TRANE NTXAMT12A112AA Manuel D'installation page 16

-For combining indoor units with outdoor units, refer to the
outdoor unit's installation manual.
7. Installing the Unit
7. Installing the unit
The air handler can be installed in a vertical, horizontal (Right and
Left) and Downflow configuration as shown below. The units are
designed for "0" zero clearance to combustibles. 24" is required for
The air handler can be installed in a vertical, horizontal (Right and Left) configuration as shown in step 9.1. through 9.3.
The units are designed for "0" zero clearance to combustibles. 24 in. (610 mm) is required for service access to the front of
service access to the front of the unit. (See below) Regardless of
the unit (see Installation Clearance). Regardless of mounting configuration, the air handler must be mounted level to
mounting configuration, the air handler must be mounted level to
facilitate proper condensate drainage.
facilitate proper condensate drainage.
Installation Clearance Installation Clearances
TOP View
Vertical Installation
Clearance Area
24"
Width of Unit
PA79D202H01
Specifications are subject to change without notice.
NTXAMT12, 18, 24, 30, 36A112AA
TOP View
Horizontal Installation
Clearance Area
Length of Unit
16
9.A. Vertical Installa
supported on the bottom
plenum below or field su
Securely attach the air h
plenum.
The side return can be u
24 only. If the side return
installer to ensure the d
the cabinet. When cutti
provided dimples to avoid
wiring.
24"
© 2018 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Unit Mo