Mitsubishi Electric TRANE NTXAMT12A112AA Manuel D'installation page 28

CORRECT
PLASTIC TIE
PLASTIC TUBE
Model
12/18/24A112AA
4 30/36A112AA 5 6 7
Step. 11 Reinstall the coil assembly along with the bracket(s) that secure(s) it. Failure to reinstall the brackets will
result in capacity loss and condensation formation inside the cabinet. Be sure the thermistor harness is reconnected
inside the coil portion of the cabinet. Refer to 9.3 steps 1 to 4 to reassemble the panels. Ensure the proper knockouts
are removed for drainage and electrical connections.
Horizontal Left
Fan assembly rotation required.
Specifications are subject to change without notice.
NTXAMT12, 18, 24, 30, 36A112AA
INCORRECT
5/8"
PLASTIC TIE
(15mm)
Tube Length
4.9 in. (125 mm)
6.9 in. (175 mm) 8 9 10
DETAIL A
PLASTIC TUBE
MITSUBISHI ELECTRIC CORPORATION
DATE
DIM.mm
DRAWN
SCALE
0.200
CHECKED
NTS
DESIGNED
11 12 13
28 © 2018 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
E
F
G
H
ITEM MODEL NAME
COMMERCIAL TOLERANCE
WORK GRADE
I
CASTING
FINE COARSE
PRESS WORKING A B C
D E
GAS CUTTING A B
SHEARING A B
MACHINING
MEDIUMCOARSE
3D
CONFIDENTIAL
APPROVED
J
18
14 15 16
④ Reattach Bracket(s)
⑤ Electrical Knockouts
⑥ Side Drain Pan on bottom
⑦ Motor on bottom
⑤ Electrical Knockouts
⑧ Auxiliary Drain Pan
⑨ Primary Drain 3/4" FPT
⑩ Airflow