Mitsubishi Electric TRANE NTXAMT12A112AA Manuel D'installation page 29

Horizontal Mounting
The unit can be installed on a platform or suspended from rails as shown below. The rails must run the length of the unit
and be of sufficient strength to support the weight of the unit and connected ductwork. Vibration isolation is recommended
for horizontal installations. Some jurisdictions may require an auxiliary drain pan be mounted under the unit. Always follow
local or national code requirements.
1
2
Specifications are subject to change without notice.
NTXAMT12, 18, 24, 30, 36A112AA
3
3
29
① Platform Mounting
② Suspended Mounting
③ Auxiliary Drain Pan
© 2018 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.