Mitsubishi Electric TRANE NTXAMT12A112AA Manuel D'installation page 22

Masquer les pouces Voir aussi pour TRANE NTXAMT12A112AA:

Les langues disponibles

NTXAMT12, 18, 24, 30, 36A112AA

Step. 3b Next, remove the smaller panels covering the drain holes and refrigerant lines by first sliding in the direction

indicated above.

Step. 4 Remove all electrical connections entering the control box. This includes the motor connector. Pull these

harnesses from the control box. Next, remove the (2) screws indicated in the image and remove the control box from

the air handler.

Specifications are subject to change without notice.