Publicité
Les langues disponibles
Les langues disponibles
AutoChef™
When you are using AutoChef™ to operate the heating
element, a sensor controls the temperature of the pan.
Advantages when frying
The cooking element only heats when it is necessary.
This saves energy. Oil and grease do not overheat.
CAUTION
9
Never leave oil or fat cooking unattended.
▯
Place the pan in the centre of the element. Make
▯
sure that the base of the pan has the proper
diameter.
Do not cover the pan with a lid. The automatic
▯
programming will not work. A mash splatter
guard can be used without affecting the
automatic regulation.
Only use fat or oil that is suitable for frying. When
▯
you are using butter, margarine, olive oil or pork
lard, select the min temperature setting.
AutoChef™ is not suitable for boiling.
▯
Frying levels
Power level
Temperature
high
max
medium - high
med
low - medium
low
low
min
Setting the AutoChef
feature
®
Select the appropriate frying level from the chart. Place
the system pan in the center of the element. The cooktop
must be on.
Depending on the appliance model the AutoChef™
feature is fitted in the center element or the left front
element. Check your cooktop elements for the printing
auto chef.
Notes
If AutoChef™ is fitted on a two-circle cooking zone, the
▯
feature can only be used on the entire cooking zone.
If AutoChef™ is fitted on the three circle cooking zone
▯
of your cooktop, the outer heating ring is not available
while using this feature.
If only the inner section of the cooking zone is
▯
activated, the additional ring will automatically be
turned on once you select the AutoChef™ feature.
Select the cooking zone with the AutoChef™ feature.
1.
Touch AutoChef. The
2.
display. The frying level options appear on the display
menu.
Suitable for
Steaks medium rare, fried boiled potatoes
Veal cutlet, ground meat, thin slices of meat, vegetables
Thick pan-fried foods such as pork chop, hamburger, pancakes
Chicken breast, omelettes, french toast, hash browns, fried food in butter or
olive oil
lights up on the element
'
System pans for AutoChef™
For frying with AutoChef™ use the system pan only.
Otherwise, the controller will not work properly and may
cause your pans to overheat.
You can also purchase the system pan in specialised
stores:
HEZ390230 (ø 8"/21 cm)
HEZ390220 (ø 7"/18 cm)
HEZ390210 (ø 6"/15 cm)
The frying levels provided below are designed for our
system pans.
Auto
Power
Keep
Programs
Chef
Start
Warm
2
3
4
5
Select the desired frying level using the number keys
3.
on the display menu.
AutoChef™ is enabled.
The cooking zone turns on automatically. The
temperature symbol
ª
temperature is reached. Then a beep sounds. The
temperature symbol
ª
Auto
Power
Keep
Programs
Chef
Warm
Start
2
3
4
min low med max
6
7
8
appears until the frying
disappears.
min low med max
5
6
7
8
9
9
13
Publicité
