Cleaning And Maintenance - Futurelight EVO-5 Mode D'emploi

Control channel 4 – Prism rotation
Decimal Hexad. Percentage S/F
0 7 00 07 0% 3%
8 127 08 7F 3% 50%
128 135 80 87 50% 53%
136 255 88 FF 53% 100%
Control channel 5 – Auto program
Decimal Hexad. Percentage S/F
0 23 00 17 0% 9%
24 47 18 2F 9% 18%
48 71 30 47 19% 28%
72 95 48 5F 28% 37%
96 119 60 77 38% 47%
120 143 78 8F 47% 56%
144 167 90 A7 56% 65%
168 191 A8 BF 66% 75%
192 215 C0 D7 75% 84%
216 239 D8 EF 85% 94%
240 255 F0 FF 94% 100%

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly. The cooling-fans should be cleaned monthly.
S No rotation
F Forwards gobo-rotation with decreasing speed
S No rotation
F Backwards gobo-rotation with increasing speed
S Nomal
S Auto Program 1
S Auto Program 2
S Auto Program 3
S Auto Program 4
S Auto Program 5
S Auto Program 6
S Auto Program 7
S Auto Program 8
S Auto Program 9
S Auto Program 10
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Feature
Feature
CAUTION!
27/53 51837558_V_1_2.DOC