MIRKA DEOS CV Serie Mode D'emploi page 52

en (original)
Declaration of conformity
Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the Mirka® products (listed below and see "Technical data" table for particular model) to which
this declaration relates are in conformity with the following standards or other normative documents: EN 62841-1:2015, EN 62841-2-4:2014,
EN 55014-1:2017/A11:2020, EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 300 328 V2.2.2, EN 301 489-1 V2.1.1, EN 301 489-
17 V3.1.1, EN IEC 63000:2018 in accordance with regulations 2006/42/EC, 2011/65/EU, 2014/53/EU.
®
Products: Mirka DEOS 343, 353, 383 & 663
Jeppo 18.08.2021
Place and date of issue
Original instructions. We reserve the right to make changes to this manual without prior notice.
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool. Keep these
instructions in a safe and accessible place. Read and comply with state and local regulations.
Required personal safety equipment
Read
operator's manual
Symbols
Complies with EU relevant standards
Complies with UK relevant regulations
Complies with China Rohs requirement
Complies with Eurasian conformity requirements
Complies with Serbian conformity requirements
И005 20
Complies with Ukraine conformity requirements
Complies with Argentinan conformity requirements
Complies with Brazilian conformity requirements
52
Mirka® DEOS 343, 353, 383 & 663
Company Stefan Sjöberg, CEO
Wear
safety glasses
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel. +358 20 760 2111
Fax +358 20 760 2290
www.mirka.com
Wear
ear protection safety gloves
Wear Wear
face mask