Télécharger Imprimer la page

Ribimex RIBILAND PREHLS11T/VN Manuel D'instructions Et D'utilisation page 36

Publicité

Les langues disponibles

Les langues disponibles

V. OPERATION
5.1- Intended use
- The product is intended for domestic use (indoor or under shelter).
- The log splitter is only suitable for stationary operation. It must be installed only on a flat, levelled
and solid surface capable to support the weight of the machine and the log.
- The log splitter is a machine intended to split firewood, in which the log is split through the pressure
of a slab against a wedge.
Only pre-cut logs should be split with the log splitter.
Logs must only be cut vertically in the direction of the grain. NEVER cut logs horizontally or
against the grain.
The splitter is solely intended for private use for DIY and home maintenance.
Metal parts (e.g. nails, wire, etc...) must be removed from the log wood.
Do not use the machine for purposes not appropriate (e.g. cutting products containing hazardous
materials ...), or for any use not described in this manual
The splitter is designed to be used by one person only.
Observe and follow applicable national or local work safety standards with machines related to
accident prevention and safety regulations.
The machine may only be used and maintained by persons who are familiar with it and who have
been informed about the dangers connected to it.
Unauthorized modifications to the machine release the manufacturer, the distributor and/or reseller
from any liability for any resulting damage or injury.
The machine must only be used and repaired with original accessories and tools available from the
manufacturer or your local reseller.
- Do not use the machine for any other use outside the scope of this manual.
- Any other use different from that indicated in these instructions is deemed improper and may cause
damage to the machine and present a danger to the user.
- DO NOT use nor mount on the machine accessories that are not recommended by the manufacturer.
- The product is not intended for artisanal, commercial, professional and/or industrial use.
- Do not use for applications not covered in this manual.
- The manufacturer or seller cannot be held responsible for incorrect or non-compliant use of machine.
- The user / operator will be held solely responsible. The manufacturer does NOT assume any liability
for any resulting damage or accident.
5.2- Application conditions
This log splitter is a home use model. It must be used in locations protected from humidity, rain or
other adverse weather.
It is designed for operating under ambient temperatures between +5°C and +40°C and for installation at
altitudes no more than 1000m above M.S.L.
The surrounding humidity should less than 50% at 40°C.
It can be stored or transported under ambient temperatures between -20°C and 55°C max humidity 80%.
The log splitter is intended for stationary use!
The log splitter must be used vertically
and never horizontally nor in transport
position!
ATTENTION! National or local regulations regarding noise may restrict the use of the machine to
certain hours or periods. Check with your local authority.
It is recommended to restrict working hours to a minimum and always take rest periods.
For proper use, after each work period take a rest period (for ex. take a rest for 10 minutes after a work
period of 60 minutes).
Page 36 / 37

Publicité

loading

Ce manuel est également adapté pour:

043191