Moving with forklift truck / lifting carts:
The machine should be securely mounted on a pallet secured with steel tapes and protected by a plastic film.
To lift it off the pallet, several persons or technical resources are required.
Note: The centre of gravity of the log splitter is high – risk of tipping over!
By crane
Never lift the log splitter by the splitting knife (wedge).
Never lift the log splitter by the handle.
Put the lifting gear (e.g. hook) on the lifting eye located on the upper part of the machine column.
Transporting the log splitter
When transporting in a vehicle, make sure to firmly secure the machine with no parts protruding
outside the vehicle to avoid a danger (e.g. fall, injury, damage; ...)
4.7- Maximum pressure limiting device
The maximum pressure was set before the log splitter left the factory and the maximum pressure
limiting screw is sealed to ensure the log splitter works under the set pressure.
No operator resetting is required.
Unauthorized resetting will cause the hydraulic pump to fail to output enough splitting pressure or
result in severe injury as well as damage to the machine.
Unauthorised intervention will void the guarantee.
Page 35 / 36