EUROM Mon Soleil 601 Manuel D'utilisation page 70

Note: Guide the electric cable and the thermostat cable (if applicable) immediately
downwards and make sure that they do not come into contact with the panel. Do
not conceal any surplus cable behind the heater!
Use and working
Control panel
1. Main switch & pilot light
2. Temperature sensor
3. Display
4. Up/down key
5. ON/OFF switch
6. button M
7. Connection external temperature sensor
External temperature sensor (7)
Because the temperature sensor is located on the
heater, it does not measure the external
temperature very accurately. If you want accurate
measuring, connect the separate thermostat (included in the delivery) by inserting
b. Heating symbol
c. Open-window detection symbol
d. WiFi symbol
e. Capacity indication symbol
the small plug into the control panel and placing the sensor
approx. 2 metres away from the heater (see illustration). For
this purpose, you should remove the heater from the wall and
subsequently, place it back. When you have connected the
separate thermostat, it automatically takes over the thermostat
operation.
Display (3)
a. Temperature / Data
70