Description, composition and installation
1. Heating panel
2. Control switch
3. Main switch
4. Electra cable with plug
5. Permanent temperature
sensor
6. Connection external
temperature sensor
7. Suspension frame
8. Suspension knobs 2
9. Display
Attention! The illustration shows the Mon Soleil 350; other models have deviating
dimensions and appearance, but the components described are the same.
Remove all packaging material and keep out of reach of children.
After removing packaging, check the appliance for damage or other signs that could
indicate a fault/defect/malfunction. In case of doubt, do not use the appliance, but
contact your vendor for inspection or replacement.
The fixing materials supplied are intended for a brick wall. If you are using a
different type of surface, you should supply appropriate fixing materials yourself.
This heater has been designed to hang securely from the wall.
Do not use it until it has been properly installed, as described in these
instructions for use and never, for example, in a standing position or when
leaning against something!
67