Furuno NAVnet 3D Mode D'emploi page 64
Masquer les pouces
Voir aussi pour NAVnet 3D:
- Guide d'utilisation (4 pages) ,
- Guide d'utilisation (21 pages) ,
- Guide d'utilisation (48 pages)
Publicité
Enter the correct IP address and click on "Assign"
You will need to restart (power OFF and ON) the IP camera you want to change the IP address of.
(Just unplug and plug back the Ethernet cable if you are using the POE).
It can take a while before the confirmation box appears.
Click the "Close" button.
The first IP camera should be correctly assigned
64
Publicité
