Furuno NAVnet 3D Mode D'emploi page 58
Masquer les pouces
Voir aussi pour NAVnet 3D:
- Guide d'utilisation (4 pages) ,
- Guide d'utilisation (21 pages) ,
- Guide d'utilisation (48 pages)
Publicité
Caméra AXIS
Setup Axis IP Camera
Introduction: To configure the Axis IP camera you will need to connect a PC to the NavNet
network hub using a regular RJ45 Ethernet cable. You will have to set up the IP of the computer
and use the AXIS IP utility to configure the IP camera.
Set the IP of the computer
Go to "Start" and select "Control Panel"
Open "Network Connections"
58
Publicité
