Furuno NAVnet 3D Mode D'emploi page 63

The AXIS IP utility will detect all the IP cameras connected on the network
Note: If you use the same IP camera model on multiple locations, make sure to write down the IP
Camera serial number (that can be found on the back of the camera) with the location to make sure
to assign correctly the IP camera name.
In this example, we will assign the moving camera (212 PTZ) to IP Camera 1 (Deck), the non
moving camera with the SN ending with 34CB to IP Camera 2 (Engine Port) and the non moving
camera with the SN ending with 3441 to IP Camera 3 (Engine Starboard).
To change the IP address of the Camera, just select the camera in the list and click on the "assign
new IP address to selected device" button
63