Furuno NAVnet 3D Mode D'emploi page 60

Fill the IP fields as shown below.
Click on OK to confirm and close the 2 windows.
Note that the new IP can take up to 20 seconds to be recognized. A pop-up in the lower right corner
should show when the IP is correctly set. Turn OFF any Firewall that could prevent data to be
exchanged between NavNet and the PC. You may also have to restart your computer.
Set up the IP address of the camera
To work with NavNet3D, the IP cameras need to be set up with specific IP. Up to 4 IP camera can
be connected on a network.
IP Camera number 1 = 172.031.200.003
IP Camera number 2 = 172.031.200.004
IP Camera number 3 = 172.031.200.005
IP Camera number 4 = 172.031.200.006
In this example, we will set up 3 IP cameras:
60