en Cleaning and servicing
Setting
Autom. switch-off
Water hardness
Key tones
Factory settings
Home Connect
1
Factory setting (may vary according to model)
Changing the basic settings
Press
1.
Use
or
2.
sired basic setting and press
a The display will show the setting
options and the navigation sym-
bols will light up. The display indic-
ates the current setting.
Use
or
3.
sired selection and press
a The setting is now saved.
Use
to go back.
4.
Press
5.
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
70
Selection
See options on the appliance.
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
Water-softening system
Key tones on
Key tones off
Full reset?
Continue: OK
Cancel: ←
The selection depends on the
network status and whether the
appliance is connected to
"Home Connect".
.
to select the de-
to make the de-
.
to exit the menu.
1
1
Dishwasher-safe components
Find out which components can be
cleaned in the dishwasher.
.
ATTENTION!
Some components are sensitive to
heat and may be damaged if they are
cleaned in a dishwasher.
Follow the operating instructions of
▶
the dishwasher.
Only put dishwasher-safe compon-
▶
ents in the dishwasher.
Only use programmes that do not
▶
heat the water above 60 °C.
Dishwasher-safe components:
¡ Drip tray
– Drip plate
– Drip grate
– Coffee dregs container
– Mechanical fill level indicator
¡ Milk system with adapter
Description
Set how long the appliance
should wait after preparing the
last drink before automatically
switching itself off.
Set the appliance to the local
water hardness.
→ "Setting the water hardness",
Page 58
Switch the button tones on or
off.
Restore settings to the factory
settings.
Note: All individual settings will
be deleted and reset to the fact-
ory settings.
Select settings for "Home Con-
nect".
→ "Overview of Home Connect
settings", Page 67