Siemens TQ507DF3 Notice D'utilisation page 64

en Basic operation
Place two cups on the left and
3.
right under the outlet system.
Press ⁠ .
4.
The drink is prepared in 2 steps.
The beans are ground in 2 grind-
ing operations.
a The drink is brewed and then runs
into the cup.
Wait until the process is com-
5.
pleted.
Grinder
Your appliance has an adjustable
grinder, which you can use to cus-
tomise the grinding level of your cof-
fee beans.
Adjusting the grinding level
Set the desired grinding level while
the coffee beans are being ground.
WARNING
Risk of injury!
The grinder rotates.
Never reach into the grinder.
▶
ATTENTION!
Risk of damage to the grinder. The
grinder may be damaged if the grind-
ing level is not set properly.
Only set the grinding level when
▶
the grinder is running.
Select the grinding level using the
▶
rotary selector step by step.
Grinding level
Fine grinding level
for dark-roasted
beans.
Coarse grinding
level for light-roas-
ted beans.
64
Setting
Turn rotary selector
counter-clockwise.
Turn rotary selector
clockwise.
The setting only has an effect after
the second cup of coffee.
Tip: If the coffee is only dispensed
drop by drop, set a coarser grinding
level.
If the coffee is too thin with too little
crema, set a finer grinding level.
Water filter
You can use a water filter to minimise
limescale deposits and reduce impur-
ities in the water.
Inserting and activating the water
filter
ATTENTION!
Possible damage to the appliance
due to limescale build-up.
Change the water filter in good
▶
time.
Change the water filter after
▶
2 months at the latest.
Note: If "Replace water filter" is
shown on the display, replace the
water filter.
If you are not inserting a new filter,
select "No filter" and follow the in-
structions on the display.
Immerse the water filter in a glass
1.
of water and press the sides to-
gether lightly until no more air
bubbles rise to the surface.
→ Fig.
3
Press ⁠ .
2.
Use or
3.
ter" and press
Use or
4.
ter" or "Replace water filter" and
press ⁠ .
Note: If you are not inserting a new
5.
filter, select "No filter" in the menu
settings.
Push the water filter firmly into the
water tank and press
→ Fig.
4
to select "Water fil-
⁠ .
to select "New fil-
⁠ .