Publicité
Les langues disponibles
Les langues disponibles
en Home Connect
Basic setting
Connect to network
Disconnect from net-
work
Connect to app
Remote start
Software update
Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip: For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
Software update
You can use this function to update
the software of your appliance, e.g.
for optimisation, troubleshooting or
safety-relevant updating.
The "Home Connect" app informs
you about available software up-
dates.
Running software update
Requirements
¡ The appliance is connected to your
home network and your mobile
device.
¡ The app and the display indicate
that a software update is available.
68
Selection
Connect manually
Connect automatically
-
-
Switch on remote start
Switch off remote start
-
Description
Reconnect the appliance to your home network.
Note: You cannot operate your appliance via the
"Home Connect" app without a network connec-
tion.
Connect the appliance to "Home Connect" or ad-
ditional "Home Connect" accounts.
Switch remote start on the appliance on and off.
Note: With the "Home Connect" app only switch-
off is possible.
Select available software update and execute.
Start the software update now or
1.
later on.
Wait until the display shows "Soft-
2.
ware update successful".
Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Publicité
