Siemens TQ507DF3 Notice D'utilisation page 57

accessories
Cleaning tablets
Descaling tablets
Water filter
Water filter pack of 3
Microfibre cloth
Care set
Adapter for milk containers
Before using for the first time
Before using for the
first time
Configure the basic settings. Clean
the appliance and individual parts.
Perform the initial start-up
After connecting the appliance to
▶
the power supply, configure the
settings for initial start-up.
Note: The automatic display for se-
lection of the language and water
hardness only appears when the ap-
pliance is switched on for the first
time.
Tip: You can change the settings at
any time.
→ "Basic settings", Page 69
Fill the water tank
Fill the water tank each day with
fresh, cold, non-carbonated water.
Open the lid.
1.
Remove the water tank using the
2.
recessed grip.
Rinse the water tank.
3.
Fill the water tank up to the "max"
4.
mark.
Retail
TZ80001A
TZ80001B
TZ80002A
TZ80002B
TZ70003
TZ70033
-
TZ80004A
TZ80004B
TZ50001
5.
6.
Fill coffee bean container
ATTENTION!
Unsuitable beans can block up the
grinder.
▶
▶
▶
▶
▶
1.
2.
3.
Before using for the first time en
Customer service
00312097
00312098
00312094
00312095
00575491
-
00460770
00312105
00312106
17004535
Insert the water tank into the
holder, keeping it straight.
Close the lid.
Only use pure, roasted bean mixes
that are suitable for use in fully
automatic coffee or espresso ma-
chines.
Do not use glazed coffee beans.
Do not use caramelised coffee
beans.
Do not use coffee beans that have
been treated with additives con-
taining sugar.
Do not add ground coffee.
Open the lid.
Fill with the coffee beans.
The appliance will adjust to the
coffee beans with the next dis-
pensing process.
Close the lid.
57