en Basic operation
Dispensing coffee drinks with
milk froth
Requirements
¡ The milk container has been con-
nected.
¡ The milk container has been filled
with milk.
Place your pre-warmed cup under
1.
the outlet system.
Press the symbol for a coffee drink
2.
with milk.
a The display will show the drink and
your current settings.
→ "Drink settings", Page 63
Change the settings where neces-
3.
sary:
Use
to adjust the amount.
‒
→ "Adjusting the amount",
Page 63
Use
to adjust the coffee
‒
strength.
→ "Adjusting the coffee
strength", Page 63
Use the ground coffee compart-
‒
ment.
→ "Dispensing a coffee drink
made from ground coffee",
Page 60
Press
and wait until the process
4.
is complete.
After preparing the drink, the milk
system will automatically clean it-
self with a short jet of steam.
Tip: If you want to stop the dispens-
ing process early, press
want to stop the dispensing process
altogether, press
Dispensing special drinks
Your appliance has other drinks be-
sides the ones that you can obtain
via the quick-selection buttons.
Press
several times.
▶
→ "Drinks overview", Page 56
62
. If you
.
Dispensing milk froth
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
▶
it is hot.
Allow the hot milk system to cool
▶
down before touching it.
Requirements
¡ The milk container has been con-
nected.
¡ The milk container has been filled
with milk.
Place your pre-warmed cup under
1.
the outlet system.
Press
repeatedly until the dis-
2.
play shows "Milk froth".
Change the setting if necessary:
3.
Use
to adjust the amount.
‒
→ "Adjusting the amount",
Page 63
Press
.
4.
a The milk froth will run out of the
outlet system.
Press
to stop the dispensing
5.
process.
Dispensing hot water
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
▶
it is hot.
Allow the hot milk system to cool
▶
down before touching it.
Note: If the milk system has not been
cleaned, small amounts of milk may
be dispensed with the water.