Télécharger Imprimer la page

Heiniger PegasusMidi Mode D'emploi page 22

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
3.3
Charging process
The appliance is not yet ready for operation when delivered.
Before first use, the appliance should be charged for 2 hours.
The charging time is then approx. 1 hour. "Overcharging" the appliance is not
possible.
WARNING
Before plugging in the power supply unit 15, check that the voltage
of the wall socket corresponds to the specifications on the type
plate.
1. Plug the power supply unit 15 into a wall socket.
2. Figure C: insert the plug of the connecting cable 14 into the port in the charg-
ing station 16.
3. Place the appliance into the charging station 8. It positions itself automatically
and starts charging. The LED in the On/Off switch 1 is lit continuously. The
colour changes with the charging state from almost empty (orange) to fully
charged (green). During charging, the LED will flash every couple of seconds.
NOTE: figure B: you can also charge the appliance by plugging the plug of the
connecting cable 14 directly into the port in the appliance 10.
3.4
Cable mode
You can also use the device in cable mode, e.g. when the battery is not charged.
WARNING!
Before plugging in the plug-in power supply device 15, check that
the voltage of the power socket corresponds to the specifications
on the type plate.
20
ENGLISH
1. Plug the power supply unit 15 into a wall socket.
2. Figure B: to do this, insert the plug of the connecting cable 14 directly into the
port in the appliance 10. Depending on the charging state, it may take a few
seconds before the device can be started in cable mode.
4
Operation
4.1
Switching On/Off
– To switch the appliance on, briefly press the On/Off switch 1 on top of the appli-
ance. The appliance starts to operate and the LED of the On/Off switch is lit.
– To switch the appliance off, hold down the On/Off switch 1 on top of the appli-
ance for a few seconds.
4.2
On/Off switch - LED colours
The colours of the On/Off switch 1 indicate the charging state of the battery dur-
ing operation and charging:
Colour
Red
Yellow
Green
Charging state
The battery is almost empty.
The battery is partially charged.
The battery is full.

Publicité

loading

Ce manuel est également adapté pour:

Oc20