Publicité
Les langues disponibles
Les langues disponibles
Canopy
1
- Slide the canopy mounts onto the stroller. A "click"
sound means the canopy is assembled completely.
2
- Fasten the four snaps on the back of the canopy.
Armbar
It is always recommended that the armbar be used, but it
is not a restraint device. Always secure the child with the
harness.
3
- Align the armbar ends with the armbar mounts (the Nuna
logo should be right side up, facing out), and insert until
it clicks into place. A "click" sound means the armbar is
assembled completely.
4
- To rotate the armbar, press the armbar release button on
one side (1) and rotate the armbar from the other side (2).
5
- To remove the armbar, press the armbar release buttons
(1) and pull the armbar out (2).
Check Setup
Stroller frame is latched open
Rear and front wheels are securely attached
Canopy is securely attached
Armbar is securely attached
16
TRVL lx instructions
1
click
2
3
click
4
1
2
5
2
1
1
TRVL lx instructions
17
Publicité
