Publicité
Les langues disponibles
Les langues disponibles
Product Use
Securing Your Child
The parking brake MUST be engaged when the stroller is
stopped and when placing and removing child.
To avoid serious injury from falling or sliding out, always
secure your child with the harness.
1
- Push the top button on the buckle to release the buckle
latch and remove the magnetic clips.
Place your child in the stroller.
2
- Insert the magnetic clips into the buckle.
3
- Fit the harness snugly to your child by sliding the
adjustment straps to tighten (1). Then pull the waist
adjustment straps out (2).
Shoulder Harness Position
4
- For added adjustment, unsnap the shoulder harness
pads (1) and move the upper shoulder harness buckles
up or down (2).
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child and
the shoulder harness should be about the thickness of
one finger. DO NOT cross the shoulder belts. This will
cause pressure on your child's neck.
5
- Snap the harness pad closed over the harness strap.
18
TRVL lx instructions
1
1
2
2
2
3
1
1
2
2
4
1
2
5
TRVL lx instructions
19
Publicité
