Operation Panel - Canon RE-455X Mode D'emploi

Operation Panel

LIGHTS button/indicator
Use this button to turn ON the
illumination lamps for reflection
copies. The indicator flashes
during preheating, and stays lit
after preheating.
CAMERA button/indicator
Use this button to switch from images from an
external input (such as a computer) to images from
the unit's camera head (see page 16). The indicator
lights up when the camera is selected.
RGB IN button/indicator
Use this button to switch from images from the unit's camera
head to images via an external input (such as a computer) (see
page 16). The indicator lights up when the external input is
selected.
POWER
LIGHT
POWER indicator
Lights up when the power
is ON (see page 11).
WHITE PAPER button/indicator
Use this button to make a paper
document on the table appear whiter.
The indicator lights up when this function
is on.
EXPOSURE control
Use this knob to adjust image brightness (see
page 14).
7
WHITE BALANCE
button/indicator/control
Use this button/knob to adjust color tone (see
page 13).
INPUT SELECT
WHITE BALANCE
EXPOSURE
CAMERA
RGB IN
AUTO MANUAL
WHITE
PAPER
RED BLUE
LOW HIGH
DETAIL control
Use this control to adjust image quality
Turn the control to the HARD side to emphasize the
outline, turn to the SOFT side for softer outline.
FOCUS buttons/indicator
Use this button to focus automatically or
manually (see page 12). The indicator lights up
when auto focus is selected.
FOCUS
DETAIL
AUTO
NEAR
SOFT HARD
ZOOM PRESET button/indicator
Use this button to change the angle of view
to fit letter/A4 size (see page 13). The
indicator lights up when the button is
pressed.
STILL PICTURE button/indicator
(see page 14)
ZOOM buttons
Press the WIDE button to change
the image to wide-angle. Press the
TELE button to change the image
to telephoto.
STILL
ZOOM
PICTURE
PRESET
ZOOM
MANUAL
WIDE TELE
FAR
Press the STILL PICTURE button to freeze
a moving output image (see page 13). The
indicator lights up when the image is frozen.
.