KTM Power Parts SXS13250044 Guide D'information page 5

Scope of supply:
1x Performance cylinder head

1x O-ring 73x2

1x O-ring 105x2

6x seal rings 8x16x1

6x collar screws M8x35
Not included in scope of delivery:
1x combustion chamber insert

1x O-ring 22x2.5
NOTE:
Information on the combustion chamber inserts available for
a wide variety of requirements can be obtained directly from
your authorized dealer, in the KTM PowerParts catalog, or on
our homepage (www.ktm.com).
Preliminary work
- Clean the motorcycle, especially in the area around the
engine (see the Owner's Manual).
- Take off the seat (see the Owner's Manual).
- Remove the fuel tank (see the Owner's Manual).
- Drain the coolant (see the Owner's Manual).
Main work
- Unplug the spark plug connector

- Remove the spark plug

- Loosen the hose clamp
- Detach the radiator hose.
- Remove the cylinder head hanger plate
- Remove the 6 original cylinder head screws
- Take off the original cylinder head.
NOTE:
Both dowel pins must remain in the cylinder.

SXS13250051
0770730020
0770105020
5653008000
54830079000

0770220025



5