Publicité
Les langues disponibles
Les langues disponibles
Fault
Possible cause
• Screws are loose
Loud while running, ma-
• Blade fasteners are loose
chine vibrates heavily
• Blade is unbalanced
• Brake lever not pressed
• Speed lever in wrong position
• Spark plug is defective
Engine does not start
• Fuel tank is empty
• Contaminated fuel
• Cold environment
• Engine faulty
• Air filter is soiled
Engine runs unsteadily
• Spark plug is soiled
• Blade is blunt
Uneven mowing results
• Cutting height is too low
• Cutting height is too low
Unsatisfactory bagging of
• Blade is worn
the grass
• Basket is clogged
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
Remedy
• Check screws
• Check blade fasteners
• Replace blade
• Press brake lever
• Check setting
• Replace spark plug
• Refill with fuel
• Empty fuel tank and fill with clean fuel
• Push the primer button (if present)
• Contact authorised customer service
• Clean the air filter
• Clean the spark plug
• Sharpen the blade
• Set correct height
• Set correct height
• Replace the blade
• Empty the basket
32 | GB
Publicité
