CAMPAGNOLO 13s CRANKSET Mode D'emploi page 37

8 - M A I N T E N A N C E / L U B R I C AT I O N / C L E A N I N G
- The duration of the components is variable based on the conditions of use,
frequency and quality of maintenance. For proper component maintenance, it is
necessary to frequently perform the cleaning and lubrication operations, especially
under conditions of heavy use (e.g. each time after washing the bicycle, after use in
wet conditions, on dusty or muddy roads etc.).
- Check chapter 9 to determine the frequency with which you should have
maintenance performed on your components by a specialised mechanic: Period
maintenance.
- Dirt seriously damages the bicycle and its components. Wash, clean and dry your
bicycle carefully after use.
- Never spray your bicycle with water under pressure. Pressurized water, even form
the nozzle of a small garden hose, can pass under seals and enter your Campagnolo
components, thereby affecting its operation. Wash your bicycle and Campagnolo
components by wiping them down with water and neutral soap.
- Check that any holes on the bottom bracket shell are unobstructed and allow water
infiltrating into the frame to drain.
WARNING!
Salty environments (such as winter roads or roads near the sea) may lead to
galvanic corrosion of most of the bicycle's exposed components. To prevent damage,
malfunctions and accidents, rinse, dry and carefully re-lubricate all components
which are subject to this phenomenon.
ENGLISH
37
C A M PA G N O L O . C O M