CAMPAGNOLO 13s CRANKSET Mode D'emploi page 34

- FOR EKAR: Position the new chainring
on the crankset support, making the pin
on the chainring align with the hand crank
(Fig. 8).
- FOR EKAR GT: position the new chainring
so that the marks on the chainring itself
are visible on the inside of the crankset
and so that the reference tooth is correctly
positioned (Fig. 9).
- Prior to refitting, low-resistence Loctite
22 must be applied on the thread of the
screws.
- Follow a crosswise order to tighten the
four screws (1-2-3-4) (Fig. 10).
Fig.9
34
6 - C H A I N R I N G R E P L A C E M E N T
C A M PA G N O L O . C O M
Fig.8
2
4
Fig.10
3
1
ENGLISH