CAMPAGNOLO 13s CRANKSET Mode D'emploi page 31

5 - U S E
The threaded holes for the pedals located
on the hand crank are type 9/16'' x 20 TPI.
The thread of the left hand crank is left-
handed (Fig. 2), therefore turn the pivot
of the pedal anticlockwise to fit the pedal,
whereas the thread of the right hand
crank is right-handed (Fig. 2.1), therefore
turn the pivot of the pedal clockwise to fit
the pedal.
Observe the tightening torque indicated
by the pedal manufacturer.
Fig.2 Fig.2.1
6 - C H A I N R I N G R E P L A C E M E N T
The Ekar crankset is designed so that the chainring can be replaced without having
to remove the crankset.
To replace the chainring, which requires a minimum amount of mechanical skill and
the correct tools, follow the procedure indicated below, or, alternatively, have your
mechanic replace it.
To always ensure maximum compatibility and efficiency, use only original
Campagnolo components.
- Place your bicycle on a stable support and put on gloves to protect your hands.
ENGLISH
31
C A M PA G N O L O . C O M