Publicité
Les langues disponibles
Les langues disponibles
Secure the control box with the M5 screws provided in the accessories bag by drilling four 3/16" pilot holes
as shown in the allowed area below. Place washers, provided in accessories bag, between the control box
and cabinet.
NOTE
• Match drill holes (4) per layout.
• Only drill through the sheetmetal. Drilling any further can damage the coil.
• Washers, provided in accessories bag, must be installed between control box and
cabinet to create a gap between the control box and cabinet.
CAUTION
When the ambient dew point temperature exceeds 73° F (23° C), dew condensation may
occur on the PAA unit surface. Without a gap between the control box and PAA unit
cabinet, dew condensation may enter the control box which may result in unit damage or
failure.
Specifications are subject to change without notice.
PAA-A18, 24, 30, 36, 42AA1/BA1/CA1
71
© 2022 Mitsubishi Electric US, Inc.
Publicité
