Publicité
Les langues disponibles
Les langues disponibles
The following must be considered while deciding on a location to install the control box:
• Control box must be installed at least 1 inch from the edge of the surface, as shown below.
• The surface must be flat.
• Surface area must not have any cutouts or depressions.
14.1. Control box - cabinet installation
NOTE
• Control box can be mounted on the left or right side of the cabinet. Regardless, the
control box positioning dimensions are the same.
• For environments when the ambient dew point temperature exceeds 73° F (23° C), if the
control box must be mounted to the PAA unit cabinet, be sure to perform appropriate
treatment to the PAA unit cabinet, such as duct wrap, prior to attaching the control box
to the PAA unit cabinet.
Specifications are subject to change without notice.
PAA-A18, 24, 30, 36, 42AA1/BA1/CA1
70
© 2022 Mitsubishi Electric US, Inc.
Publicité
