Publicité
Les langues disponibles
Les langues disponibles
PAA unit airflow restriction table
Airflow
CMM
Maximum
CFM
CMM
Minimum
CFM
NOTE
The above airflow restriction is limited to the heat pump operation only.
WARNING
• Ensure the gas furnace complies with ANSI-Z21.47/CSA2.3 standards by NRTL 3rd
party lab such as AGA, CSA, UL, or ETL/Intertek. Mitsubishi Electric air conditioner/
heat pump system must only be connected with ANSI-Z21.47/CSA2.3 certificated gas
furnace.
– Improper connection may result in poisonous gas, fire, explosion, electric shock or
water leak.
• Do not install the PAA unit onto any OIL or DRUM type furnaces.
– Failure to follow this warning could result in personal injury or death.
• Do NOT install the PAA unit on any furnaces or applications where supply air
temperature could exceed 200º F.
– Failure to follow this warning could result in personal injury or death.
• The PAA unit should only be installed on a furnace with an output capacity no greater
than 300% of the rated PAA unit cooling capacity.
– Failure to follow this warning could result in personal injury or death.
Specifications are subject to change without notice.
PAA-A18, 24, 30, 36, 42AA1/BA1/CA1
PAA-
PAA-
A18AA1
A24AA1
PAA-
PAA-
A18BA1
A24BA1
23.0
23.5
812
830
12.0
15.6
424
551
25
IDU
PAA-
PAA-
A30AA1
A36BA1
PAA-
PAA-
A30BA1
A36CA1
29.0
34.0
1024
1201
19.8
22.7
700
800
© 2022 Mitsubishi Electric US, Inc.
PAA-
A42BA1
PAA-
A42CA1
47.0
1660
26.5
936
Publicité
