Publicité
Les langues disponibles
Les langues disponibles
Step 5: Attach the front plate to the main drain pan using the 4 screws.
Step 6: Insert the heat exchanger back into the cabinet. Ensure the notches in the back of the main drain
pan engage with the two rear brackets inside the cabinet.
CAUTION
• Use extreme caution when inserting the heat exchanger back into the cabinet to avoid
damaging the thermistor wires.
– Damaged thermistor wires may result in improper or dangerous operation of the unit.
Specifications are subject to change without notice.
PAA-A18, 24, 30, 36, 42AA1/BA1/CA1
53
© 2022 Mitsubishi Electric US, Inc.
Publicité
