Specifications And Technical Data - Max NF565A/16 Manuel D'utilisation Et D'entretien

3. SPECIFICATIONS AND TECHNI-
CAL DATA
1. NAME OF PARTS
3
7
2
1
6
5
9 4
2. TOOL SPECIFICATIONS
PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
RECOMMENDED
OPERATING PRESSURE
LOADING CAPACITY
AIR CONSUMPTION
 The machine has been compactly designed in order to im-
prove operating weight balance.
3. BRAD NAIL SPECIFICATIONS
1-1/4"
32 mm
38 mm
Wire gauge: 16
1 Frame
2 Cylinder Cap
3 Exhaust Cover
4 Magazine
5 Pusher Lock
Button
6 Trigger
7 Grip
8 Warning Label
9 Outlet
8
NF565A/16
284 mm (11-3/16")
95 mm (3-3/4")
297 mm (11-11/16")
1.5 kg (3.4 lbs)
5 to 7 bar
(70 to 100 p.s.i.)
110 Nails
1.3 at 7 bar
3
(0.045 ft at 100 p.s.i.)
operating pressure
NF565A/16
1-1/2"
1-3/4"
2"
2-1/4"
45 mm
2-1/2"
51 mm
57 mm
65 mm
<1.4 mm>
TOOL AIR FITTINGS:
This tool uses a 1/4" N.P.T. male plug. The inside diameter
should be 7mm (.28") or larger. The fitting must be capable of dis-
charging tool air pressure when disconnected from the air supply.
RECOMMENDED OPERATING PRESSURE:
5 to 7 bar (70 to 100 p.s.i.). Select the operating air pressure with-
in this range for best fastener performance.
DO NOT EXCEED 8.3 bar (120 p.s.i.).
4. TECHNICAL DATA
1 NOISE
A-weighted single-event sound power level
A-weighted single-event emission sound pressure level at
work station
These values are determined and documented in accord-
ance with EN12549 : 1999.
2 VIBRATION
Vibration characteristic value
These values are determined and documented in accord-
ance with ISO 8662-11.
This value is a tool-related characteristic value and does not
represent the influence to the hand-arm-system when using
the tool. An influence to the hand-arm-system when using
the tool will, for example, depend on the gripping force, the
contact pressure force, the working direction, the adjust-
ment of mains supply, the workpiece, the workpiece sup-
port.
5. APPLICATIONS
 Door and window casings
 Plywood, decorative boards, and other interior finish works
 Panel assembly and moldings
 Sub flooring
 Furniture assembly including drawer assembly, case back
nailing, blind pinning, and other finishing works
 Cabinet assembly
7
------ LWA, 88.6 dB
Uncertainty (KWA): 3 dB
------ LpA, 85.2 dB
Uncertainty (KpA): 3 dB
2
= 3.3 m/s
2
Uncertainty(K): 1.5 m/s