Specifications And Technical Data; Tool Specifications; Fastener Specifications - Max PowerLite HS130 Manuel D'instructions D'utilisation

OPERATING INSTRUCTIONS MANUAL

1. SPECIFICATIONS AND TECHNICAL DATA

1. NAME OF PARTS (SEE Fig.1)
1 Frame
2 Cylinder Cap
Contact Arm
3
4 Nose
2.

TOOL SPECIFICATIONS

HEIGHT
WIDTH
LENGTH
WEIGHT
LOADING CAPACITY
RECOMMENDED OPERATING PRESSURE
AIR CONSUMPTION
3.

FASTENER SPECIFICATIONS

NAIL LENGTH
SHANK DIAMETER
SHANK TYPE
HEAD DIAMETER
COLLATION ANGLE
HEAD
4. TECHNICAL DATA
NOISE
A-weighted single-event sound power level
A-weighted single-event emission sound pressure
level at work station
Uncertainty
These values are determined and documented in accordance to EN12549:1999+A1:2008.
NOTE: These values are tool-related characteristic values and do not represent the noise generation at the point of use. Noise at the point
of use will for example depend on the working environment, the workpiece, the workpiece support, and the number of driving operations.
In addition, reference should be made to noise reduction measures.
NOTE: Workplace design can also serve to reduce noise levels, for example placing workpieces on sound-damping supports
(see also ISO 11690-1).
ENGLISH
5 Magazine
6 Trigger
Grip
7
8 Exhaust Cover
90 to 130 mm
(3-1/2" to 5-1/8")
Φ3.1 to Φ4.2 mm
(.112" to .165")
Smooth, Ring, Screw
Φ7.0 to Φ8.5 mm
(.276" to .335")
21 degree
Full round head
105.0 dB
------ LWA, 1s, d
------ LpA, 1s, d
9 Pusher
0 Plug
Trigger Lock Dial
a
426 mm (16-3/4")
85 mm (3-3/8")
571 mm (22-1/2")
4.3 kg (9.5 lbs.)
60 Nails
17 to 23 bar (250 to 320 p.s.i.)
5.4L at 23 bar (320 p.s.i.)
operating pressure
98.8 dB
3dB
1