Max NF565A/16 Manuel D'utilisation Et D'entretien page 6

23. WHEN DISPOSING THE MACHINE OR ITS PARTS, FOL-
LOW THE RELEVANT NATIONAL RULES
24. ALWAYS WEAR HEAD PROTETION, SAFETY SHOES
AND MASK FOR APPROPRIATE CONDITIONS
OBSERVE THE FOLLOWING GENERAL CAU-
TION IN ADDITION TO THE OTHER WARNINGS
CONTAINED IN THIS MANUAL
 Do not use the tool as a hammer.
 Always carry the tool by the grip, never carry the
tool by the air hose.
 The tool must be used only for the purpose it was
designed.
 Never remove, tamper with the operating controls
(e.g., TRIGGER, CONTACT ARM)
 Keep the tool in a dry place out of reach of chil-
dren when not in use.
 Do not use the tool without Safety Warning label.
 Do not modify the tool from original design or
function without approval by MAX CO., LTD.
 Do not use the tool when you feel something un-
usual. (Air leak, strange noise, operating unusual-
ly.)
6