Important - Elite Quick-Motion Mode D'emploi

EN
place it by proceeding as follows:
• make sure the belts are not tensioned;
Technical assistance:
• unscrew the screws from the rear left shell, op-
Phone 0039 049 5940044
posite the cursor (Ref. E) (Pic. 20):
e-mail: info@elite-it.com
• unscrew the wheel block (Ref. I) (Pic. 21);
• remove the internal shell (Pic. 22);
• remove the front block and the rotating spindle
(Pic. 23);
• it is now possible to replace the worn-out belt;
• assemble the front body and make sure to place
the spindle correctly (Pic. 24);
• assemble the internal shell (Pic. 25);
• assemble the oscillating block (Pic. 26);
• assemble the external shell (Pic. 20).
!CAUTION!
• Make sure belts are correctly positioned before
beginning training (Pic. 3 - Pic. 4 - Pic. 5).
7) When beginning or ending your training session,
make sure that your feet, the pedals or the wheels
do come in contact with the transmission belts.

IMPORTANT

1) Read and follow the enclosed instructions.
2) Keep people, children and animals away from
the roller during use, since the moving and rotating
parts of the roller and the bicycle can cause dama-
ge in case of contact.
3) Before starting training, position the trainer in a
dry place, away from potentially hazardous objects
(furniture, tables, chairs, etc.) in order to avoid any
risk of inadvertent or accidental contact with them.
4) When beginning or ending your training session,
make sure that your feet, the pedals or the wheels
do come in contact with the transmission belts.
Please use the original hometrainer box if you need
to ship it for assistance and / or repairs.
Any damage caused by the use of other packing
methods is not covered under the warranty.
NOTE: Please check with ELITE, its distributor or
retailer before shipping the hometrainer or one of
its components. Shipments without approval will
be rejected.
17